ALT Impact - Polaris 2005-2015 RMK PRO 36" Chromoly True Clearance Kit

True Clearance Arm Kit

All standard colors are in stock and ready to ship. 

This kit updates you to the 2019 react geometry.

The rod end design is a huge advantage allowing you, in most cases, to simply unscrew them after an impact replace the rod end with your spare and continue to ride without replacing a full A-Arm.  NOT guaranteed but proven to work at least 75% of the time. This is a “TRUE” ground clearance arm, both tubes are arched unlike others on the market that have the front tube arched and rear tube not.  This kit is a direct stock replacement with the same geometry as the stock 2019 850, utilizes stock shocks (16.625) Our upper A-Arm design with a fairly wide radius will accommodate ANY stock or aftermarket shocks even with piggyback reservoirs. This is a COMPLETE kit that comes with all new hardware, you do not need to press out or reuse any stock components with the exception of the steering tie rods, if you choose the kit W/O the steering tie rods.

* If you choose to run your sway bar with this kit you need to purchase the 2019 react front end sway bar.

* 2011 and 2012 Pro’s came standard with a shock length of 17.5″ and need to be shortened to work properly. Proper shock length for this kit is 16 3/8″ eye to eye extended length

Kit comes complete with:

• 2 Lower arms with preinstalled delrin bushings
• 2 Upper arms with preinstalled delrin bushings
• 2 lower 5/8″ rod ends one piece with misalignment bushing built in
• 2 5/8″ jam nuts
• 2 1/2″ upper rod ends
• 2 1/2″ jam nuts
• 4 12mm nylon nuts
• 2 12 mm sway bar mounting bolts
• 2 8mm lower shock nylon nuts

Additional information:

***We STRONGLY recommend purchasing additional Upper and Lower Rod ends as these are designed to be the failure point to help prevent the loss of an A-Arm.