Description
ALT Impact - Polaris 2016-2025 RMK Axys/Matryx 36" Chromoly True Clearance Arm Kit with 1" LIFT Spindles.
Description *** SEE ORDER RECOMMENDATION BELOW
2016-2025 Axys/Matryx 36″ True Clearance Arm Kit with 1″ Lift Spindles
All standard colors are in stock and ready to ship.
The rod end design is a huge advantage allowing you, in most cases, to simply unscrew them after an impact replace the rod end with your spare and continue to ride without replacing a full A-Arm. NOT guaranteed but proven to work at least 75% of the time. This is a “TRUE” ground clearance arm, both tubes are arched unlike others on the market that have the front tube arched and rear tube not. This kit is a direct stock replacement with the same geometry as the stock 2019 850, utilizes stock shocks (16 or 16.625). This kit works with the stock sway bar. Our upper A-arm design with a fairly wide radius will accommodate ANY stock or aftermarket shocks even with piggyback reservoirs. This is a COMPLETE kit that comes with all new hardware, you do not need to press out or reuse any stock components.
- 2 Alternative Impact Light Weight 1″ Lift Spindles
- 2 Lower arms with preinstalled delrin bushings
- 2 Upper arms with preinstalled delrin bushings
- 2 lower 5/8″ rod ends one piece with misalignment bushing built in
- 2 5/8″ jam nuts
- 2 1/2″ upper studded rod ends
- 2 1/2″ jam nuts
- 4 12mm nylon nuts
- 2 12 mm sway bar mounting bolts
- 2 8mm lower shock nylon nuts
- 2 Titanium bolts
- 2 Titanium nuts
Additional information:
***We STRONGLY Recommend purchasing additional upper and lower Rod Ends as these are designed to be the failure point to help prevent the loss of an A-Arm.
Weight | 17 lbs |
---|---|
Dimensions | 12 × 16 × 4 in |